• Home
  • Products
  • support
  • CONTACT
  • HISTORY
  • PLOW MATCH
  • Dealer Opportunity
  • Shop
Picture

Dump Insert

Dump inserts available for 6', 6.5' and 8' truck beds.

​Dump inserts manufactured in 7', 7.5' and 9' lengths
Perfect for: ​Landscapers, Campgrounds, Cemeteries, Roofers, Contractors, Woodcutters, and Stables etc. 

BUSY DUMPER FEATURES


  • 60° dump capability using a 4" x 12" D.A. Cylinder.
  • GVWR 6,000lb
  • Payload Capacity: 22" x 9' 2.8YD, 6.8YD -w- 3ft. stake sides - Max 6,000 lb.
  • 9' Dump Insert weighs 1,050 lbs.  7' or 7.5' Dump Insert weighs approx. 800 lbs.
  • Controlled dumping with lower tailgate chains and down pressure- never dump too or much too little
  • Power up and down for locking dump body tight to truck bed.
  • Tail lights in dumper add to visibility and safety
  • Full, double-acting/ removable tailgate -w- 1/2" pins.
  • 8 stake pockets.
  • 12 gauge floor, 14 gauge sides.
  • "Z" beams on all hoist points to resist flexing.
  • 3/4" pins -w- two support points each on both hinges.
  • Power unit is accessible when dumper is down.
  • Top perimeter of dumper has 9/16" holes spaced 12" apart for easy tarping.
  • Available in Gloss Black.
  • Optional cab protector with screen window and drip edge. 
  • Rear corners of tailgate jam 4"x3"x.25" angle for impact resistance.
  • Dumper fastened to truck frame at four points with brackets - not just to body floor.
  • Hold down clamps are bolted to dumper sub-frame to prevent sliding.
  • Remote magnetic switch with 9 foot cord.
  • Using remote switch and power down feature -dump exactly what you want - never too much.
  • All welds are between 1-1/2" and 3" long - no tack or spot welds employed.
Note: Do not exceed the capacity of your truck when using your dumper.  
             Dump Insert DOES NOT interfere with tow hitch or towing what so ever.

7' Dump Insert Demo

7' Busy Dumper

60 DEGREE ANGLE, Power UP, Power Down. #insertdumper

Posted by Pathfinder Snowplows on Wednesday, May 2, 2018

9' Dump Insert 

Busy Dumper

Dump Inserts manufactured for 6' and 8' truck beds. Inserts are biult in 7' and 9' lengths to dump material past the truck bumper. Also included with a 60° dump angle, power up & down hydraulic unit, and tail lights.

Posted by Pathfinder Snowplows on Sunday, April 7, 2019
DESCRIPTION
MSRP

7' & 7.5' Dump Insert
9' Dump Insert
Cab Protector
Tarp Roller & Tarp
​Plow & Dumper Package*
Utility Dump Insert
Chassis Mounted (with no truck bed)
​Custom Paint


$3,495.00
​$3,595.00
$225.00
$120.00
​CALL
​CALL
​$300.00
​$200.00
​Installation MSRP: $300.00
RI Sales Tax 7%: $167.65 - $195.65

​Call for a quote on shipping
Financing Available 
Contact
Picture

Upgrades

LED Tail Lights
Picture
Details: Halo Tail (16 diode). 6 diode stop/turn.
​Price: $60
Nylon Chain Sleeve
Picture
Details: 1" abrasion resistant.  Prevents paint chafe and reduces chain noise.
Price: $40

Factory Direct

Busy Dumpers are manufactured and installed in the same factory as Pathfinder Snowplows, located in Rhode Island.  Pathfinder has manufactured dump inserts since 1988 in RI.  Installations and cash and carry pick-ups are available for local customers coming from Connecticut, Massachusetts, RI etc.  Shipping is also available nationally, please call for a quote.  Dump inserts for sale are available for utility body pick ups and trailers as well.  Turn your pickup truck into a dump truck or your trailer into a dump trailer for the best price, factory direct.  Dump inserts made in RI.   

10' Mesh Tarp

$75.00

10' Ballistic Mesh Tarp Grey

Size 69" W x 120" L 

(14) #3 Ring Grommets

Shop

Contact Us


 1-844-742-9088
 Email: sales@pathfindersnowplows.com
Open Monday thru Friday
8 AM. to 4 PM.
Saturday : 9 AM. to 12 PM.


​


After Hours/ Winter Storm Contact: 401-269-8158

Our Address:
​
Pathfinder
​Snowplows

45 Industrial Dr.
Exeter, RI 02822
  • Home
  • Products
  • support
  • CONTACT
  • HISTORY
  • PLOW MATCH
  • Dealer Opportunity
  • Shop